A drywall repair that doesn't match the surrounding texture stands out — and so does the painter who got it wrong. Texora Painting specializes in seamless texture matching across Delta, Tsawwassen, and Ladner, replicating any wall or ceiling finish so repairs become invisible.
Get a Free Texture Repair QuoteAny experienced drywall contractor will tell you: finishing flat walls is straightforward. Matching an existing texture on a patch repair is where most people fall short. Texture matching requires you to simultaneously understand the original technique, replicate the compound consistency, apply at the correct timing window, and feather the edges so the patch transition is invisible. Get any of these wrong and the repair will be obvious — even more obvious in some cases than just leaving the damaged surface.
When a wall or ceiling has been painted multiple times over the years, the original texture profile is softened and partially filled. A fresh texture patch applied at full profile will stand proud of the surrounding surface and catch light differently. The solution is to reduce the depth of the patch texture slightly, extend the feathered area further, and ensure the transition is gradual rather than abrupt. This is a skill developed through experience — not something you can learn from a YouTube video on a visible wall.
Texora Painting has matched textures on dozens of patch repairs across Delta homes. We assess the existing texture, prepare a test patch if needed on an inconspicuous area, and only proceed to the full repair once we are confident the match is right. We would rather spend an extra 30 minutes getting the match right than deliver a repair that needs to be redone.
The current standard in new BC construction. A perfectly flat, paint-ready surface. Requires extremely careful feathering and sanding — any unevenness is visible in raking light. Matching a smooth surface is harder than it looks.
A fine, random stipple resembling citrus skin. Applied by spray gun at controlled pressure. Very common in BC homes from the 1990s–2010s. Matching requires the right nozzle and compound dilution.
Random irregular flat spots created by partially flattening a blown or trowel-applied texture. One of the most common textures in 1990s Delta homes. Replicating the random pattern authentically takes practice.
A hand-applied texture created by skimming a trowel across a surface with random overlap patterns. Each applicator's technique is slightly different, making this one of the harder textures to match precisely.
A heavy, random texture created by stamping or slapping compound with a brush or roller, leaving irregular spiky peaks. Common in 1980s BC homes. Typically deeper and more dramatic than modern textures.
A spray-applied stipple texture most common on ceilings. Can be patched, though an exact match on aged popcorn is rarely achievable. Full removal is often the preferred solution for affected ceilings.
Texture matching is required whenever a drywall patch or replacement is made on a wall or ceiling that has an existing texture. Common situations include:
Hardware stores sell aerosol texture products marketed as "orange peel" or "knockdown" — these products rarely match real wall textures well. They come out at a fixed pattern size, cannot be feathered properly, and often look obviously patched once paint goes on. For small repairs inside closets or pantries, they may be acceptable. For living rooms, hallways, bedrooms, and any area that receives direct or raking light, a professional result is always worth it.
We assess the texture type, prepare the compound to the right consistency, and apply using the correct technique for that specific texture. For spray textures, we adjust nozzle and pressure on a test board first. For hand-applied textures, we study the rhythm and depth of the original application. We feather the patch boundary well beyond the repair area, and work to match the depth and profile of the surrounding texture as closely as possible.
On freshly textured walls, a very close match is achievable. On walls that have been painted many times over years or decades, exact matching becomes harder — the texture profile has been partially filled and the surface has taken on a different character. We set realistic expectations with every homeowner before starting. In most cases, a skilled texture match on a well-prepared surface is invisible at normal viewing distance and in ambient lighting.
In homes built after 2000, smooth (skim coat) or light orange peel is most common on walls. Knockdown was very popular in 1990s BC construction. Skip trowel and heavier hand textures were common in 1980s homes. In older Tsawwassen and Ladner properties from the 1970s, stomp or slap brush textures appear frequently. On ceilings, popcorn/acoustic was dominant until the mid-1990s, when knockdown and smooth became standard.
Knockdown texture is a deliberate, randomized pattern created by applying compound in irregular blobs or a spray, letting it partially set, then flattening the peaks with a wide trowel — "knocking down" the high points. The result is a pattern of flat islands with textured valleys between them. It was extremely popular in BC residential construction through the 1990s and remains common throughout Delta.
For a standard drywall patch repair, texture matching is included in our pricing — we don't separate it out as a surcharge for small repairs. For larger areas requiring significant texture blending, or projects involving multiple texture types in one space, we include a detailed breakdown in the written quote. Typical texture matching as part of a repair adds $80–$250 to the overall repair cost depending on complexity.
Orange peel is a fine, random stipple texture that resembles the dimpled surface of a citrus fruit. It is applied using a hopper spray gun with controlled air pressure. The texture depth and pattern size are determined by compound consistency and nozzle settings. Orange peel is one of the most forgiving textures to match because its randomness means slight variations are less noticeable than in hand-applied textures.
A poor texture match — usually one where the patched area stands proud of the surrounding wall or has an obvious perimeter edge — must be corrected before repainting. We skim over the failed patch with a thin coat of compound to fill in the excess texture, let it dry, sand smooth, and then re-apply the correct texture with a properly extended feather zone. In some cases, retexturing a larger area eliminates the visible boundary entirely.
Absolutely. Many Delta homeowners take advantage of a full interior repaint or renovation to update from dated 1980s stomp or skip trowel textures to modern smooth or light orange peel. The process involves skim coating the existing texture smooth, sanding, priming, and applying the new texture. It is a significant amount of work but the result is transformative — rooms feel more modern and fresh, and the new texture holds paint better.
Consistently 5-star rated for quality and attention to detail.
"Absolutely amazing work! The attention to detail and professionalism really stood out, and the final result completely exceeded expectations."
"They do know what they are doing. Highly recommend."
"Quality work and service. Very nice and exceptional. Really recommended."
Our Work
Live photos from our Google Business page — updated automatically as we add more projects.
