Real Results
Deck Staining — Before & After
Drag the divider left or right to see the transformation. Same deck, same day — completely different result.
⬆⬇
Your deck takes a beating from BC's coastal weather — sun, rain, and moisture cause wood to grey, crack, and peel. Texora Painting strips old finish, preps the surface, and applies professional-grade deck stain or paint for a result that lasts 5–8 years.
Get a Free Deck QuoteA well-maintained deck is one of the most valuable outdoor spaces a home in Tsawwassen or Ladner can have — and one of the most neglected. BC's coastal climate is particularly hard on wood: prolonged moisture exposure promotes mould and mildew growth, UV rays break down the wood fibres and surface finish, and the constant freeze-thaw cycle works its way into any crack or gap. Left unprotected, a wood deck that looked great at installation can grey, soften, and begin to deteriorate within 2–3 years.
The difference between a deck refinishing job that lasts and one that peels in the first season comes down almost entirely to preparation. Texora Painting follows a full prep process on every deck project: power washing and brightening the wood, stripping any failing existing finish, hand-sanding rough boards and checking for soft or damaged sections, and allowing adequate dry time before the first coat goes on. We never rush the prep stage. A well-prepared, clean, dry surface is the only foundation for a stain or paint that will hold for 5–8 years in the Lower Mainland climate.
Whether your deck needs a semi-transparent stain to show off natural wood grain, a solid colour stain for a uniform look, or a full deck paint system for maximum durability, we'll walk you through the right product for your wood species, exposure level, and maintenance preferences. We serve homeowners throughout Tsawwassen, Ladner, North Delta, and South Delta, and we carry full liability insurance on every job.
Semi-transparent and solid stains that penetrate the wood for lasting protection and rich colour. Available in a wide range of tones from natural cedar to deep charcoal.
Get a Quote →Full-coverage deck paint systems for decks where colour uniformity and maximum film protection are the priority. Ideal for older or patched boards where grain variation needs to be hidden.
Get a Quote →Power washing, deck stripping, wood brightening, and hand sanding. Available as a standalone service or as part of a full refinishing package. The most important step in any deck project.
Get a Quote →Replacement of rotted, cracked, or soft deck boards before refinishing. We assess structural condition and replace problem boards so the finished deck is sound underneath the stain.
Get a Quote →The most common reason deck stain fails prematurely isn't the product — it's the surface it was applied to. Stain applied over a dirty, wet, or previously coated surface cannot bond properly to the wood fibres. Within months, it peels, flakes, and traps moisture underneath, accelerating the very wood damage it was meant to prevent. Texora Painting's full prep process — wash, strip, brighten, dry, sand — ensures the stain has a clean, open, dry wood surface to penetrate. That one step is the difference between a job that looks great for 6 months and one that looks great for 6 years.
Drag the divider left or right to see the transformation. Same deck, same day — completely different result.
In BC's coastal climate, a professionally applied semi-transparent deck stain typically lasts 3–5 years on horizontal surfaces like deck boards, and 5–7 years on vertical surfaces like railings and fascia. Solid stains and deck paints last longer — usually 5–8 years — because they form a thicker film barrier. Proper prep (cleaning, sanding, and allowing the wood to dry fully) is the single biggest factor in how long the finish lasts. A well-prepped deck in Tsawwassen or Ladner, using a premium product, reliably hits the upper end of those ranges.
For BC's wet coastal climate, a high-quality oil-modified or alkyd-based penetrating stain performs very well because it soaks into the wood fibres rather than forming a surface film that can peel. Premium water-based deck stains have improved significantly and now rival oil-based products for durability while being easier to clean up. Brands we commonly use include Cabot, Sansin, and Benjamin Moore's Arborcoat line — all formulated for high-moisture environments. The best stain for your specific deck depends on the wood species, existing finish condition, and your preferred appearance. We'll recommend the right product after assessing your deck.
Proper prep is critical and is what separates a lasting job from one that peels in a year. Our process involves: power washing or hand-scrubbing the deck to remove dirt, algae, and mildew; stripping any existing peeling stain or paint with a deck stripper; sanding rough or splintered boards; spot-treating grey oxidized wood with a brightener to open the grain; allowing the wood to dry completely (minimum 48–72 hours of dry weather in BC); and masking adjacent surfaces before any product is applied. We do not skip any of these steps — even when a homeowner is in a hurry.
Deck stain (semi-transparent or solid) penetrates into the wood and is easier to maintain — when it wears, it does so gradually and a fresh coat can be applied without full stripping. Deck paint sits on top of the wood as a film coat, providing excellent colour uniformity and the longest lifespan, but when it fails it tends to peel and must be fully stripped before recoating. For decks with attractive wood grain worth preserving, stain is usually the better choice. For decks with heavily worn or mismatched boards where appearance uniformity is the goal, solid colour paint or solid stain is often the right answer. We're happy to discuss both options and show you samples before you decide.
Deck staining in the Tsawwassen, Ladner, and Delta area typically ranges from $500–$1,800 for a standard residential deck, depending on deck size, condition of the wood, the prep work required, and the product chosen. Decks that require significant stripping, board repairs, or multiple coats will be at the higher end. We provide written quotes after assessing the deck in person — there are no surprise charges. Most homeowners in our service area find the investment pays for itself quickly in extended wood life and avoided replacement costs.
Yes, pressure treated (PT) lumber can absolutely be stained — but timing matters. New PT lumber must be allowed to dry out fully before staining, typically 6–12 months after installation. Freshly treated wood is saturated with preservative chemicals and excess moisture, which prevents stain from absorbing properly. A simple test: sprinkle water on the surface. If it beads up, the wood is not ready. If it absorbs, the wood is ready to stain. We assess new PT decks and will tell you honestly if the wood needs more time before we schedule the refinishing work.
Consistently 5-star rated for quality and attention to detail.
"Absolutely amazing work! The attention to detail and professionalism really stood out, and the final result completely exceeded expectations."
"They do know what they are doing. Highly recommend."
"Quality work and service. Very nice and exceptional. Really recommended."